PCB Board Commercial Use Mold Mould PCB PCBA Circuit Board Dry Ice Cleaning Machine

Dry ice cleaning advantages
1.Dry ice particles can be sprayed into microorganisms that are difficult to clean with traditional methods.
Small spaces, for very precise molds or product surfaces,It won't cause any damage at all.
2.High-density dry ice particles impact the surface more strongly,Release more kinetic energy to remove

stubborn stains quickly and efficiently effect.
3.The unique physical properties of dry ice make it the perfect cleaning medium. Dry ice is non-corrosive,

will not damage surfaces. Dry ice is sprayed at high speed.
4.It sublimates quickly after the surface of the object, and will not cause secondary pollution. No chemical

solvents are used in the entire cleaning process, making the working environment more environmentally

friendly and safer for workers.
5.Save time – no drying required, after cleaning the circuit boards are dry and ready for packaging.
6.Environmentally friendly – no toxic wastewater is produced. The removed residue is separated and discarded in the air filter.
7.Selective – no need to clean the entire PCB, only the side containing flux residue High sensitivity – removes flux residue without affecting the PCB structure

These advantages make dry ice (snow) cleaning an efficient, economical and environmentally friendly cleaning solution.

Technical Parameter

Machine structure diagram

Cleaning effect comparison

Notice:

1.Moving

Make sure that the moving space is sufficient, safe and free from obstacles. Otherwise, there is a possibility of injury or damage to the device.

Make sure to cut off the power and air supply. Otherwise, there is a possibility of electric shock and damage to the device.

2.Installment

Pay attention to whether the fasteners are loose during installation, otherwise there may be product failure and human injury.

3.Wiring

When installing and removing the power cord, it must be performed by a professional electrician, otherwise there is a possibility of electric shock.

4.Running

Do not put your fingers or foreign objects into the moving parts or rotating parts of the cylinder when the device is working, otherwise there is a possibility of injury and damage to the device.

Do not put your fingers or foreign objects near the circuit when the device is working, otherwise there may be injury and damage to the device.

5.Maintenance and Inspection

Please regularly check whether the fastening screws and the sensor are loose, otherwise there may be device failure and the possibility of decreased accuracy.

Commercial Use Dry Ice Cleaning Machine

PCB Board Dry Ice Cleaning Machine

Mold Mould Dry Ice Cleaning Machine

Commercial Use Mold Mould PCB PCBA Circuit Board Dry Ice Cleaning Machine Images